A CV + full list of publications can be downloaded here.


  • Albertini, F., Dirrenberger, J., Molotnikov, A., & Sollogoub, C. (2019). Computational investigation of the effective mechanical behavior for 3D pre-buckled auxetic lattices. Journal of Applied Mechanics, 86(11), 111003.
  • Kuzmenko, K., Gaudillière, N., Feraille, A., Dirrenberger, J., & Baverel, O. (2019, September). Assessing the Environmental Viability of 3D Concrete Printing Technology. In Design Modelling Symposium Berlin (pp. 517-528). Springer, Cham.
  • F. dell’Isola, P. Seppecher, M. Spagnuolo, E. Barchiesi, F. Hild, T. Lekszycki, I. Giorgio, L. Placidi, U. Andreaus, M. Cuomo, S.R. Eugster, A. Pfaff, K. Hoschke, R. Langkemper, E. Turco, R. Sarikaya, A. Misra, M. De Angelo, F. D’Annibale, A. Bouterf, X. Pinelli, A.Misra, B. Desmorat, M. Pawlikowski, C. Dupuy, P. Peyre, M. Laudato, L. Manzari, P. Göransson, C. Hesch, S. Hesch, P. Franciosi, J. Dirrenberger, F. Maurin, Z. Vangelatos, C. Grigoropoulos, V. Melissinaki, M. Farsari, W. Muller, B.E. Amali, C. Liebold, G. Ganzosch, P. Harrison, R. Drobnicki, L. Igumnov, F. Alzahrani, and T. Hayat (2019). Advances in pantographic structures: design, manufacturing, models, experiments and image analyses. Continuum Mechanics and Thermodynamics, 31, 1231-1282.
  • M. De Angelo, M. Spagnuolo, F. D’Annibale, A. Pfaff, K. Hoschke, A. Misra, C. Dupuy, P. Peyre, J. Dirrenberger, and M. Pawlikowski (2019). The macroscopic behavior of pantographic sheets depends mainly on their microstructure: experimental evidence andqualitative analysis of damage in metallic specimens. Continuum Mechanics and Thermodynamics, 31, 1181-1203.
  • Wang, Z. P., Poh, L. H., Zhu, Y., Dirrenberger, J., & Forest, S. (2019). Systematic design of tetra-petals auxetic structures with stiffness constraint. Materials & Design, 170, 107669.
  • Lapouge, P., Dirrenberger, J., Coste, F., & Schneider, M. (2019). Laser heat treatment of martensitic steel and dual-phase steel with high martensite content. Materials Science and Engineering: A, 752, 128-135.
  • Ernault, E., Dirrenberger, J., Richaud, E., & Fayolle, B. (2019). Prediction of stress induced by heterogeneous oxidation: Case of epoxy/amine networks. Polymer degradation and stability, 162, 112-121.
  • Duballet, R., Baverel, O., & Dirrenberger, J. (2019). Space Truss Masonry Walls With Robotic Mortar Extrusion. Structures, 18, 41-47.
  • Yang, S., Dirrenberger, J., Monteiro, E., & Ranc, N. (2019). Representative volume element size determination for viscoplastic properties in polycrystalline materials. International Journal of Solids and Structures, 158, 210-219.
  • Dirrenberger, J., Forest, S., & Jeulin, D. (2019). Computational Homogenization of Architectured Materials. In Architectured Materials in Nature and Engineering (pp. 89-139). Springer, Cham.
  • Gaudillière, N., Duballet, R., Bouyssou, C., Mallet, A., Roux, P., Zakeri, M., & Dirrenberger, J. (2019). Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete. In 3D Concrete Printing Technology (pp. 37-58). Butterworth-Heinemann.


  • Dirrenberger, J. (2018). Towards an integrated approach for the development of architectured materials (Habilitation dissertation, Sorbonne Université).
  • Gaudillière, N., Duballet, R., Bouyssou, C., Mallet, A., Roux, P., Zakeri, M., & Dirrenberger, J. (2018, September). Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars. In Robotic Fabrication in Architecture, Art and Design (pp. 459-472). Springer, Cham.
  • Buswell, R. A., Leal de Silva, W., Jones, S. Z., & Dirrenberger, J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research, 112, 37-49.
  • Dirrenberger, J. (2018). From Architectured Materials to Large-Scale Additive Manufacturing. In Robotic Building (pp. 79-96). Springer, Cham.
  • R. Duballet, O. Baverel, & J. Dirrenberger (2018). Design of Space Truss Based Insulating Walls for Robotic Fabrication in Concrete. In: De Rycke K. et al. (eds) Humanizing Digital Reality (pp. 453-461). Springer, Singapore.


  • R. Duballet, O. Baverel, and J. Dirrenberger. Classification of building systems for concrete 3D printing. Automation in Construction, volume 83, 2017, pp. 247-258
  • N. Torabian, V. Favier, J. Dirrenberger, F. Adamski, S. Ziaei-Rad and N. Ranc. Correlation of the high and very high cycle fatigue response of ferrite based steels with strain rate-temperature conditions. Acta Materialia, volume 134, 2017, pp. 40-52
  • Z.P. Wang, L.H. Poh, J. Dirrenberger, S. Forest, and Y. Zhu. Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization. Computer Methods in Applied Mechanics and Engineering, volume 323, 2017, pp. 250-271
  • N. Torabian, V. Favier, S. Ziaei-Rad, J. Dirrenberger, F. Adamski and N. Ranc. Calorimetric Studies and Self-Heating Measurements for a Dual-Phase Steel Under Ultrasonic Fatigue Loading. In Fatigue and Fracture Test Planning, Test Data Acquisitions, and Analysis, ASTM STP1598, Z. Wei, K. Nikbin, P. McKeighan, and G. Harlow, Eds., ASTM International, West Conshohocken, PA, 2017, pp. 81–93
  • J. Dirrenberger. From Architectured Materials to the Development of Large-scale Additive Manufacturing. SPOOL, volume 4(1), 2017


  • N. Torabian, V. Favier, S. Ziaei-Rad, F. Adamski, J. Dirrenberger and N. Ranc. Self-Heating Measurements for a Dual-Phase Steel under Ultrasonic Fatigue Loading for Stress Amplitudes below the Conventional Fatigue Limit. Procedia Structural Integrity, volume 2, 2016, pp. 1191-1198
  • N. Torabian, V. Favier, S. Ziaei-Rad, J. Dirrenberger, F. Adamski, and N. Ranc. Thermal Response of DP600 Dual-Phase Steel under Ultrasonic Fatigue Loading. Materials Science and Engineering: A, volume 677, 2016, pp. 97-105
  • A. Bironeau, J. Dirrenberger, C. Sollogoub, G. Miquelard-Garnier and S. Roland. Evaluation of morphological representative sample sizes for nanolayered polymer blends. Journal of Microscopy, volume 264(1), 2016, pp.48-58
  • C. Gosselin, R. Duballet, Ph. Roux, N. Gaudillière, J. Dirrenberger and Ph. Morel. Large-Scale 3D Printing of Ultra-High Performance Concrete– A New Processing Route for Architects and Builders. Materials & Design, volume 100, 2016, pp. 102-109


  • N. Auffray, J. Dirrenberger and G. Rosi. A complete description of bi-dimensional anisotropic strain-gradient elasticity. International Journal of Solids and Structures, volume 69-70, 2015, pp. 195-206
  • G. Rosi, N. Auffray and J. Dirrenberger. Wave propagation in the framework of strain gradient continua: the example of hexachiral materials. 22ème Congrès Français de Mécanique, Lyon, France, August 2015


  • N. Gaudillière, J. Dirrenberger, O. Baverel and C. Sollogoub. Additive Manufacturing for the Development of an Assembling System for Gridshells. In What’s the Matter? Materiality and Materialism at the Age of Computation, 2014, ed. M. Voyatzaki, pp. 195-210, ISBN: 978-960-89320-6-7
  • J. Dirrenberger, S. Forest and D. Jeulin. Towards gigantic RVE sizes for stochastic fibrous networks. International Journal of Solids and Structures, volume 51(2), 2014, pp. 359-376

2013 and older

  • J. Dirrenberger, S. Forest and D. Jeulin. Effective elastic properties of auxetic microstructures: anisotropy and structural applications. International Journal of Mechanics and Materials in Design, volume 9(1), 2013, pp. 21-33
  • J. Dirrenberger, S. Forest and D. Jeulin. Elastoplasticity of auxetic materials. Computational Materials Science, volume 64, 2012, pp. 57-61
  • J. Dirrenberger, S. Forest and D. Jeulin. Effective properties of auxetics made using selective laser melting. Matériaux & Techniques, volume 100, S1, 2012, pp. 172-173
  • J. Dirrenberger, S. Forest, D. Jeulin and C. Colin. Homogenization of periodic auxetic materials. Procedia Engineering, volume 10, 2011, pp. 1852-1857
  • B. Lecampion, J. Vanzo, F.J. Ulm, B. Huet, C. Germay, I. Khalfallah and J. Dirrenberger. Evolution of Portland cement mechanical properties exposed to CO2-rich fluids: Experimental investigation at different scales. In MPPS 2011, Symposium on Mechanics and Physics of Porous Solids : A tribute to Pr. Olivier Coussy, Marne-la-Vallée, 18-20 avril 2011, 2011, 406p